Fire detection and automatic fire suppression control panels are essential control units within fire safety systems. Depending on the size of the premises, event identification requirements and level of protection needed, the appropriate type of control panel is selected to ensure reliable management of fire detection, alarm notification and suppression functions.
These panels divide the installation into separate detection zones, indicating the area in which an alarm has been triggered without identifying the specific device. They are a suitable solution for smaller installations, including shops, offices and residential properties.
Addressable control panels enable individual identification of each addressable device, allowing the precise location of an alarm activation to be identified. They are suitable for large buildings, hotels, logistics facilities, shopping centres and industrial premises.
These panels manage the sequence of operations within an automatic fire suppression system, from fire detection and the activation of warning devices to the controlled release of the extinguishing agent. They can also support additional functions, such as shutting down air conditioning and ventilation systems, in accordance with the installation's system design.
Effective fire detection depends on selecting the right detectors for the environmental conditions and potential fire risks of each premises. From optical smoke and heat detectors to specialised flame detection and linear heat detection technologies, every system is designed to provide early and reliable detection of potential fire hazards.
These detectors use photoelectric technology to detect the presence of smoke, triggering a fire alarm when relevant signs are identified. They are commonly used in offices, shops, homes and other indoor environments.
Beam smoke detectors use an optical beam to detect smoke over long distances. They are suitable for warehouses, industrial facilities and premises with high ceilings, where conventional point-type detectors may have limitations.
Heat detectors identify increases in temperature through rate-of-rise detection or a predefined temperature threshold. They are a suitable choice for installations where environmental conditions require temperature-based fire detection.
Specialised linear heat detection cable enables the detection of excessive heat along its installed length. It is used in demanding industrial environments, including conveyor belts, cable trays, warehouses and fuel storage tanks.
Flame detectors identify the characteristic electromagnetic radiation emitted by flames, using specialised detection technologies. They are used in industrial environments and facilities with specific fire protection requirements.
These detectors integrate multiple detection technologies into a single device, combining smoke and heat sensors. They enable the evaluation of different signs of fire, depending on the operating principles and configuration of the fire detection system.
Advanced fire protection for critical infrastructure and facilities housing sensitive equipment, where the use of water or other extinguishing agents could cause additional damage.
INERGEN (IG-541) is a mixture of naturally occurring atmospheric gases that works by reducing the oxygen concentration within the protected area to suppress combustion. The system operates through appropriately designed detection, control and warning devices, in accordance with the system design and the installation's safety requirements.
Uses an inert gas extinguishing agent that leaves no residue in the protected area.
Suitable technology for facilities housing sensitive electronic equipment and critical infrastructure.
Each system is tailored to the conditions, protection requirements and safety procedures of the facility. Where permitted by the system design, INERGEN® cylinders can be installed outside the protected area, providing greater flexibility in system layout.
Selected configurations of the Fire Eater INERGEN® (IG-541) system hold UL and FM approvals, while certain components are covered by LPCB certification. The applicability of each approval depends on the equipment used and the design of the installation.
A fire safety system combines suitable fire detection, control and alarm equipment. Depending on the requirements of the installation, it may also include remote monitoring and automatic fire suppression. Explore its key components through our interactive graphic.
Compatible fire detection systems can provide remote monitoring of system status and events via a computer or mobile app, depending on the equipment and available connectivity.
Depending on their type, fire detectors identify signs of fire, such as smoke, heat or flames, and transmit the corresponding signals to the fire alarm control panel.
Manual call points allow occupants to raise a fire alarm manually, initiating the designated alarm and warning procedures.
Sounder beacons provide audible and visual warnings when a fire alarm is activated, helping to alert occupants promptly to a potential fire emergency.
The control panel receives and processes signals from connected devices, displays system events and activates the designated alarm and control functions.
Areas housing sensitive electronic equipment, such as server rooms and data centres, can be protected using appropriately designed automatic fire suppression systems.
INERGEN (IG-541) is a fire suppression agent consisting of a mixture of inert gases. The system is designed with appropriate detection, control, warning and safety devices, according to the specific requirements of the installation.
Learn More About INERGEN®This illustration is for illustrative purposes only. The final system configuration is determined by the system design and the specific requirements of each installation.
Every fire safety project has its own requirements. That is why Fotellis S.A. selects the most suitable professional equipment and designs each system with a focus on reliability, compatibility, safety standards and future scalability.
For our fire safety solutions, we use equipment from recognised manufacturers and suppliers in the industry, including DETNOV, ZETA, ZITON and FIRE EATER, according to the technical requirements and specific conditions of each installation.
